/*
* The MySensors Arduino library handles the wireless radio link and protocol
* between your home built sensors/actuators and HA controller of choice.
* The sensors forms a self healing radio network with optional repeaters. Each
* repeater and gateway builds a routing tables in EEPROM which keeps track of the
* network topology allowing messages to be routed to nodes.
*
* Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
* Copyright (C) 2013-2019 Sensnology AB
* Full contributor list: https://github.com/mysensors/MySensors/graphs/contributors
*
* Documentation: http://www.mysensors.org
* Support Forum: http://forum.mysensors.org
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
*******************************
*
* REVISION HISTORY
* Version 1.0 - tekka
*
* DESCRIPTION
* ATC mode settings and signal report functions, on RFM69 and RFM95 nodes
*
*/
// Enable debug prints
#define MY_DEBUG
// Enable and select radio type attached
// RFM69
//#define MY_RADIO_RFM69
//#define MY_RFM69_NEW_DRIVER // ATC on RFM69 works only with the new driver (not compatible with old=default driver)
//#define MY_RFM69_ATC_TARGET_RSSI_DBM (-70) // target RSSI -70dBm
//#define MY_RFM69_MAX_POWER_LEVEL_DBM (10) // max. TX power 10dBm = 10mW
// RFM95
#define MY_RADIO_RFM95
#define MY_RFM95_ATC_TARGET_RSSI_DBM (-70) // target RSSI -70dBm
#define MY_RFM95_MAX_POWER_LEVEL_DBM (10) // max. TX power 10dBm = 10mW
#include <MySensors.h>
// ID of the sensor child
#define CHILD_ID_UPLINK_QUALITY (0)
#define CHILD_ID_TX_LEVEL (1)
#define CHILD_ID_TX_PERCENT (2)
#define CHILD_ID_TX_RSSI (3)
#define CHILD_ID_RX_RSSI (4)
#define CHILD_ID_TX_SNR (5)
#define CHILD_ID_RX_SNR (6)
// Initialize general message
MyMessage msgTxRSSI(CHILD_ID_TX_RSSI, V_CUSTOM);
MyMessage msgRxRSSI(CHILD_ID_RX_RSSI, V_CUSTOM);
MyMessage msgTxSNR(CHILD_ID_TX_SNR, V_CUSTOM);
MyMessage msgRxSNR(CHILD_ID_RX_SNR, V_CUSTOM);
MyMessage msgTxLevel(CHILD_ID_TX_LEVEL, V_CUSTOM);
MyMessage msgTxPercent(CHILD_ID_TX_PERCENT, V_CUSTOM);
MyMessage msgUplinkQuality(CHILD_ID_UPLINK_QUALITY, V_CUSTOM);
void setup()
{
}
void presentation()
{
// Send the sketch version information to the gateway and controller
sendSketchInfo("ATC", "1.0");
// Register all sensors to gw (they will be created as child devices)
present(CHILD_ID_UPLINK_QUALITY, S_CUSTOM, "UPLINK QUALITY RSSI");
present(CHILD_ID_TX_LEVEL, S_CUSTOM, "TX LEVEL DBM");
present(CHILD_ID_TX_PERCENT, S_CUSTOM, "TX LEVEL PERCENT");
present(CHILD_ID_TX_RSSI, S_CUSTOM, "TX RSSI");
present(CHILD_ID_RX_RSSI, S_CUSTOM, "RX RSSI");
present(CHILD_ID_TX_SNR, S_CUSTOM, "TX SNR");
present(CHILD_ID_RX_SNR, S_CUSTOM, "RX SNR");
}
void loop()
{
// send messages to GW
send(msgUplinkQuality.set(transportGetSignalReport(SR_UPLINK_QUALITY)));
send(msgTxLevel.set(transportGetSignalReport(SR_TX_POWER_LEVEL)));
send(msgTxPercent.set(transportGetSignalReport(SR_TX_POWER_PERCENT)));
// retrieve RSSI / SNR reports from incoming ACK
send(msgTxRSSI.set(transportGetSignalReport(SR_TX_RSSI)));
send(msgRxRSSI.set(transportGetSignalReport(SR_RX_RSSI)));
send(msgTxSNR.set(transportGetSignalReport(SR_TX_SNR)));
send(msgRxSNR.set(transportGetSignalReport(SR_RX_SNR)));
// wait a bit
wait(5000);
}