/*
* The MySensors Arduino library handles the wireless radio link and protocol
* between your home built sensors/actuators and HA controller of choice.
* The sensors forms a self healing radio network with optional repeaters. Each
* repeater and gateway builds a routing tables in EEPROM which keeps track of the
* network topology allowing messages to be routed to nodes.
*
* Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
* Copyright (C) 2013-2019 Sensnology AB
* Full contributor list: https://github.com/mysensors/MySensors/graphs/contributors
*
* Documentation: http://www.mysensors.org
* Support Forum: http://forum.mysensors.org
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*/
/**
* @file MyCapabilities.h
* @ingroup MyCapabilities
*/
#ifndef MyCapabilities_h
#define MyCapabilities_h
/**
* @defgroup MyCapabilities Node capabilities indicator
* @ingroup MyConfigGrp
*
* @brief MySensors capabilities indications.
*
* At node startup, a capabilities string is shown as part of the initialization logs.
* This string indicate what configuration the node is running with.
*
* The string symbols are ordered in the following way:
* | Setting | Reset | Radio | OTA | Node | Architecture | Signing | Buffering | Encryption
* |-----------|-------------------|-------------------|--------------------|------------------|------------------|------------------|-------------------|-----------------
* | Indicator | @ref MY_CAP_RESET | @ref MY_CAP_RADIO | @ref MY_CAP_OTA_FW | @ref MY_CAP_TYPE | @ref MY_CAP_ARCH | @ref MY_CAP_SIGN | @ref MY_CAP_RXBUF | @ref MY_CAP_ENCR
*
* @see MY_CAPABILITIES
*
* @{
*/
// Remote reset
/**
* @def MY_CAP_RESET
* @brief Indicate the remote reset setting.
*
* @see MY_DISABLE_REMOTE_RESET
*
* | Setting | Indicator
* |------------|----------
* | Enabled | R
* | Disabled | N
*/
#if defined(MY_DISABLE_REMOTE_RESET)
#define MY_CAP_RESET "N"
#else
#define MY_CAP_RESET "R"
#endif
// OTA firmware update feature
/**
* @def MY_CAP_OTA_FW
* @brief Indicate the OTA update setting.
*
* @see MY_OTA_FIRMWARE_FEATURE
*
* | Setting | Indicator
* |------------|----------
* | Enabled | O
* | Disabled | N
*/
#if defined(MY_OTA_FIRMWARE_FEATURE)
#define MY_CAP_OTA_FW "O"
#else
#define MY_CAP_OTA_FW "N"
#endif
// Transport
/**
* @def MY_CAP_RADIO
* @brief Indicate the type of transport selected.
*
* @see MY_RADIO_RF24, MY_RADIO_NRF5_ESB, MY_RADIO_RFM69, MY_RFM69_NEW_DRIVER, MY_RADIO_RFM95, MY_RS485
*
* | Radio | Indicator
* |--------------|----------
* | nRF24/nRF5 | N
* | %RFM69 (old) | R
* | %RFM69 (new) | P
* | RFM95 | L
* | RS485 | S
* | None | -
*/
#if defined(MY_RADIO_RF24) || defined(MY_RADIO_NRF5_ESB)
#define MY_CAP_RADIO "N"
#elif defined(MY_RADIO_RFM69)
#if !defined(MY_RFM69_NEW_DRIVER)
// old RFM69 driver
#define MY_CAP_RADIO "R"
#else
// new RFM69 driver
#define MY_CAP_RADIO "P"
#endif
#elif defined(MY_RADIO_RFM95)
#define MY_CAP_RADIO "L"
#elif defined(MY_RS485)
#define MY_CAP_RADIO "S"
#else
#define MY_CAP_RADIO "-"
#endif
// Node type
/**
* @def MY_CAP_TYPE
* @brief Indicate the type of node.
*
* @see MY_GATEWAY_FEATURE, MY_REPEATER_FEATURE, MY_PASSIVE_NODE
*
* | Node type | Indicator
* |-----------|----------
* | Gateway | G
* | Repeater | R
* | Passive | P
* | Node | N
*/
#if defined(MY_GATEWAY_FEATURE)
#define MY_CAP_TYPE "G"
#elif defined(MY_REPEATER_FEATURE)
#define MY_CAP_TYPE "R"
#elif defined(MY_PASSIVE_NODE)
#define MY_CAP_TYPE "P"
#else
#define MY_CAP_TYPE "N"
#endif
// Architecture
/**
* @def MY_CAP_ARCH
* @brief Indicate the architecture.
*
* @see ARDUINO_ARCH_SAMD, ARDUINO_ARCH_NRF5, ARDUINO_ARCH_ESP8266, ARDUINO_ARCH_AVR, ARDUINO_ARCH_STM32F1, TEENSYDUINO
*
* | Architecture | Indicator
* |--------------|----------
* | SAMD | S
* | nRF5 | N
* | ESP8266 | E
* | AVR | A
* | STM32F1 | F
* | TEENSY | T
* | Linux | L
* | Unknown | -
*/
#if defined(ARDUINO_ARCH_SAMD)
#define MY_CAP_ARCH "S"
#elif defined(ARDUINO_ARCH_NRF5)
#define MY_CAP_ARCH "N"
#elif defined(ARDUINO_ARCH_ESP8266)
#define MY_CAP_ARCH "E"
#elif defined(ARDUINO_ARCH_ESP32)
#define MY_CAP_ARCH "F"
#elif defined(ARDUINO_ARCH_AVR)
#define MY_CAP_ARCH "A"
#elif defined(ARDUINO_ARCH_STM32F1)
#define MY_CAP_ARCH "F"
#elif defined(__arm__) && defined(TEENSYDUINO)
#define MY_CAP_ARCH "T"
#elif defined(__linux__)
#define MY_CAP_ARCH "L"
#else
#define MY_CAP_ARCH "-"
#endif
// Signing
/**
* @def MY_CAP_SIGN
* @brief Indicate the signing backend used.
*
* @see MY_SIGNING_ATSHA204, MY_SIGNING_SOFT
*
* | Signing backend | Indicator
* |-----------------|----------
* | ATSHA204 | A
* | Software | S
* | No signing | -
*/
#if defined(MY_SIGNING_ATSHA204)
#define MY_CAP_SIGN "A"
#elif defined(MY_SIGNING_SOFT)
#define MY_CAP_SIGN "S"
#else
#define MY_CAP_SIGN "-"
#endif
// RX queue
/**
* @def MY_CAP_RXBUF
* @brief Indicate the rx message buffer setting.
*
* @see MY_RX_MESSAGE_BUFFER_FEATURE
*
* | Setting | Indicator
* |------------|----------
* | Enabled | Q
* | Disabled | -
*/
#if defined(MY_RX_MESSAGE_BUFFER_FEATURE)
#define MY_CAP_RXBUF "Q"
#else
#define MY_CAP_RXBUF "-"
#endif
// Radio encryption
/**
* @def MY_CAP_ENCR
* @brief Indicate the encryption setting.
*
* @see MY_ENCRYPTION_FEATURE
*
* | Setting | Indicator
* |------------|----------
* | Enabled | X
* | Disabled | -
*/
#if defined(MY_ENCRYPTION_FEATURE)
#define MY_CAP_ENCR "X"
#else
#define MY_CAP_ENCR "-"
#endif
/**
* @def MY_CAPABILITIES
* @brief This is the resulting capabilities string.
*
* @see MY_CAP_RESET, MY_CAP_RADIO, MY_CAP_OTA_FW, MY_CAP_TYPE, MY_CAP_ARCH, MY_CAP_SIGN, MY_CAP_RXBUF, MY_CAP_ENCR
*/
#define MY_CAPABILITIES MY_CAP_RESET MY_CAP_RADIO MY_CAP_OTA_FW MY_CAP_TYPE MY_CAP_ARCH MY_CAP_SIGN MY_CAP_RXBUF MY_CAP_ENCR
/** @}*/ // End of MyCapabilities group
#endif /* MyCapabilities_h */