/*
* The MySensors Arduino library handles the wireless radio link and protocol
* between your home built sensors/actuators and HA controller of choice.
* The sensors forms a self healing radio network with optional repeaters. Each
* repeater and gateway builds a routing tables in EEPROM which keeps track of the
* network topology allowing messages to be routed to nodes.
*
* Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
* Copyright (C) 2013-2019 Sensnology AB
* Full contributor list: https://github.com/mysensors/MySensors/graphs/contributors
*
* Documentation: http://www.mysensors.org
* Support Forum: http://forum.mysensors.org
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*/
#ifndef MyHwAVR_h
#define MyHwAVR_h
#include <avr/eeprom.h>
#include <avr/pgmspace.h>
#include <avr/sleep.h>
#include <avr/power.h>
#include <avr/interrupt.h>
#include <avr/wdt.h>
#include <avr/boot.h>
#include <util/atomic.h>
#include <SPI.h>
// Fast IO driver
#include "drivers/DigitalWriteFast/digitalWriteFast.h"
// SOFTSPI
#ifdef MY_SOFTSPI
#include "hal/architecture/AVR/drivers/DigitalIO/DigitalIO.h"
#endif
#ifdef __cplusplus
#include <Arduino.h>
#endif
#define CRYPTO_LITTLE_ENDIAN
#ifndef MY_SERIALDEVICE
#define MY_SERIALDEVICE Serial
#endif
#ifndef MY_DEBUGDEVICE
#define MY_DEBUGDEVICE MY_SERIALDEVICE
#endif
// AVR temperature calibration reference: http://ww1.microchip.com/downloads/en/AppNotes/Atmel-8108-Calibration-of-the-AVRs-Internal-Temperature-Reference_ApplicationNote_AVR122.pdf
#ifndef MY_AVR_TEMPERATURE_OFFSET
#define MY_AVR_TEMPERATURE_OFFSET (324.31f)
#endif
#ifndef MY_AVR_TEMPERATURE_GAIN
#define MY_AVR_TEMPERATURE_GAIN (1.22f)
#endif
// Define these as macros to save valuable space
#define hwDigitalWrite(__pin, __value) digitalWriteFast(__pin, __value)
#define hwDigitalRead(__pin) digitalReadFast(__pin)
#define hwPinMode(__pin, __value) pinModeFast(__pin, __value)
bool hwInit(void);
#define hwWatchdogReset() wdt_reset()
#define hwReboot() wdt_enable(WDTO_15MS); while (1)
#define hwMillis() millis()
#define hwReadConfig(__pos) eeprom_read_byte((const uint8_t *)__pos)
#define hwWriteConfig(__pos, __val) eeprom_update_byte((uint8_t *)__pos, (uint8_t)__val)
#define hwReadConfigBlock(__buf, __pos, __length) eeprom_read_block((void *)__buf, (const void *)__pos, (uint32_t)__length)
#define hwWriteConfigBlock(__buf, __pos, __length) eeprom_update_block((const void *)__buf, (void *)__pos, (uint32_t)__length)
inline void hwRandomNumberInit(void);
uint32_t hwInternalSleep(uint32_t ms);
#if defined(MY_SOFTSPI)
SoftSPI<MY_SOFT_SPI_MISO_PIN, MY_SOFT_SPI_MOSI_PIN, MY_SOFT_SPI_SCK_PIN, 0> hwSPI; //!< hwSPI
#else
#define hwSPI SPI //!< hwSPI
#endif
#ifndef DOXYGEN
#define MY_CRITICAL_SECTION ATOMIC_BLOCK(ATOMIC_RESTORESTATE)
#endif /* DOXYGEN */
#endif